シームリッパー 刃先自動収納式
SKU #10597
Slice® 10597 シームリッパー 刃先自動収納式は、使用するときはスライダーボタンを押して刃を出し、スライダーボタンから手を離すと刃が自動で持ち手に引っ込むため、刃が出たままだと危ない現場や、より安全にシームリッパーをご使用いただきたい方にとって、最適なツールです。Slice社のシームリッパーには、finger-friendly®（指にやさしい）セラミック安全刃を使用しており、触っても指が切れることなく安心してお使いいただけます。ペンのような長さで薄く、転がりにくい設計の持ち手には、耐久性の高いグラスファイバー強化ナイロンを使用しています。10536 セラミック替刃（ラウンド刃先シームリッパー）が付属していますが、用途に応じ、10537 セラミック替刃（鋭角刃先シームリッパー）をオプションとしてご使用いただけます。
- 付属している刃の種類：10536 セラミック替刃（ラウンド刃先シームリッパー）
- 耐久性の高いグラスファイバー強化ナイロン製の持ち手
- 左右両利きに対応するデザイン
- 適合する替刃：10536、10537
- finger-friendly®（指にやさしい）刃は、金属刃に比べ耐摩耗性が11倍
- 化学的不活性の刃、錆びない
- 非発火性、非電導性、非磁性の刃
- オイルや潤滑油が不要な刃
- ケガの軽減、コストの削減
- 刃の交換に工具不要
- SKU #10597
Great for:
- Cutting string and thread
- Removing stitches and opening buttonholes
- Deburring soft plastics
- Hooking and slicing film
Product Specifications
Product Specifications
Cutting Depth:
Material: GFN, POM, stainless steel, carbon steel, zirconium oxide
Dimensions: L x W x H
Weight: 0.07 lb
Sell Sheet
Sell Sheet
Videos
-
Blade Replacement for Slice Seam Rippers
Compatible Products
Related Products
FAQ
What Are the Most Popular Retractable Seam Ripper Uses?
Traditional seam rippers aren’t retractable, but demand for such a tool has increased as industries and consumers alike look for safer alternatives to traditional tools. As such, retractable seam rippers are used by people who are primarily concerned with safety.
How Is the Slice Auto-Retractable Seam Ripper Unique?
Slice pushes the boundaries of the conventional retractable seam ripper definition by introducing a new kind of blade never before seen on the market: an advanced ceramic blade. And while we’re at it, of course we don’t use unnecessarily sharp advanced ceramics, which pose the same risk for lacerations as overly sharp metal blades. The edges of all our blades are finger friendly®, which means they cut effectively and are safer to touch. Choose from the installed 10536 rounded-tip blade or the 10537 pointed-tip version.
Which Blades Should I Use?
As with all our tools, the blade you use depends on your application and your priorities. In general, a rounded-tip blade is safer, as it’s less likely to cause accidental punctures. If, however, the material you need to cut requires a pointed tip to initiate the cut, you’ll have to forego the protection of a rounded tip in favor of better usability.
How Do I Change the Blade in the 10597 Seam Ripper?
As with all Slice tools, our seam rippers have an easy, no-tool blade change. To do this,
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.