自动回弹安全拆线刀
SKU #10597
在一些禁止使用固定式刀片的产业，或是如果您想找一款比手动拆线刀还安全的刀具，这款Slice® 10597自动回弹安全拆线刀。绝对是您最佳的选择。虽然市面上已有许多款式的自动回弹型拆线刀，但Slice却聪明的将先进的陶瓷安全刀片与拆线刀结合在一起。更别说Slice的安全陶瓷刀片都有着独特设计的安全刀刃，更加安全！Slice的安全拆线刀有着长且薄的玻璃填充尼龙刀柄，非常耐用。可搭配我们圆形刀尖及尖形刀尖的安全拆线刀片使用。
- 已安装刀片类型: 10536安全拆线刀片(圆形刀尖)
- 耐用尼龙刀柄
- 双手通用设计
- 兼容刀片: 10536, 10537
- 使用独特的安全刀片，使用寿命较钢制刀片长11.2倍
- 刀片为化学堕性材质，具不生锈特性
- 无火花、不导电、无磁性刀片
- 刀片无需上保养油，润滑油
- 减少伤害，降低成本
- 更换刀片无需使用工具
- SKU编号 #10597
Great for:
- Cutting string and thread
- Removing stitches and opening buttonholes
- Deburring soft plastics
- Hooking and slicing film
Product Specifications
Product Specifications
Cutting Depth:
Material: GFN, POM, stainless steel, carbon steel, zirconium oxide
Dimensions: L x W x H
Weight: 0.07 lb
Sell Sheet
Sell Sheet
Videos
-
Blade Replacement for Slice Seam Rippers
Compatible Products
FAQ
What Are the Most Popular Retractable Seam Ripper Uses?
Traditional seam rippers aren’t retractable, but demand for such a tool has increased as industries and consumers alike look for safer alternatives to traditional tools. As such, retractable seam rippers are used by people who are primarily concerned with safety.
How Is the Slice Auto-Retractable Seam Ripper Unique?
Slice pushes the boundaries of the conventional retractable seam ripper definition by introducing a new kind of blade never before seen on the market: an advanced ceramic blade. And while we’re at it, of course we don’t use unnecessarily sharp advanced ceramics, which pose the same risk for lacerations as overly sharp metal blades. The edges of all our blades are finger friendly®, which means they cut effectively and are safer to touch. Choose from the installed 10536 rounded-tip blade or the 10537 pointed-tip version.
Which Blades Should I Use?
As with all our tools, the blade you use depends on your application and your priorities. In general, a rounded-tip blade is safer, as it’s less likely to cause accidental punctures. If, however, the material you need to cut requires a pointed tip to initiate the cut, you’ll have to forego the protection of a rounded tip in favor of better usability.
How Do I Change the Blade in the 10597 Seam Ripper?
As with all Slice tools, our seam rippers have an easy, no-tool blade change. To do this,
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.