자동 후진식 실뜯개
SKU #10597
Slice® 10597 자동 후진식 실뜯개는 고정된 날이 금지된 작업장이나 수동식 실뜯개보다 안전한 대안을 찾고 있는 분들에게 안성맞춤입니다. 이미 자동식 실뜯개가 시중에 나와있지만, Slice만이 처음으로 진보된 세라믹 날을 사용한 제품을 선보입니다. 본 제품의 날이 Slice 안전 세라믹이기 때문에, 날에는 Finger-friendly® 날이 적용되었습니다. Slice 실뜯개 핸들은 견고한 유리 충전 나일론으로 만들어졌으며, 길고 얇은 형태입니다. 핸들은 둥근 칼끝과 뾰족한 칼끝 모두와 호환됩니다.
- 설치된 날 유형: 10536 실뜯개 날 (둥근 칼끝)
- 견고한 나일론 핸들
- 양손 모두를 위한 디자인
- 호환되는 날: 10536, 10537
- 금속보다 11배 오래 가는 Finger-friendly®
- 화학적 반응을 일으키지 않아 녹슬지 않는 날
- 스파크 비유발, 비전도성, 비자성 날
- 오일 및 윤활유 미사용 날
- 부상 및 비용 절감
- 별다른 공구가 필요 없는 날 교체
- SKU #10597
Great for:
- Cutting string and thread
- Removing stitches and opening buttonholes
- Deburring soft plastics
- Hooking and slicing film
Product Specifications
Product Specifications
Cutting Depth:
Material: GFN, POM, stainless steel, carbon steel, zirconium oxide
Dimensions: L x W x H
Weight: 0.07 lb
Sell Sheet
Sell Sheet
Videos
-
Blade Replacement for Slice Seam Rippers
Compatible Products
FAQ
What Are the Most Popular Retractable Seam Ripper Uses?
Traditional seam rippers aren’t retractable, but demand for such a tool has increased as industries and consumers alike look for safer alternatives to traditional tools. As such, retractable seam rippers are used by people who are primarily concerned with safety.
How Is the Slice Auto-Retractable Seam Ripper Unique?
Slice pushes the boundaries of the conventional retractable seam ripper definition by introducing a new kind of blade never before seen on the market: an advanced ceramic blade. And while we’re at it, of course we don’t use unnecessarily sharp advanced ceramics, which pose the same risk for lacerations as overly sharp metal blades. The edges of all our blades are finger friendly®, which means they cut effectively and are safer to touch. Choose from the installed 10536 rounded-tip blade or the 10537 pointed-tip version.
Which Blades Should I Use?
As with all our tools, the blade you use depends on your application and your priorities. In general, a rounded-tip blade is safer, as it’s less likely to cause accidental punctures. If, however, the material you need to cut requires a pointed tip to initiate the cut, you’ll have to forego the protection of a rounded tip in favor of better usability.
How Do I Change the Blade in the 10597 Seam Ripper?
As with all Slice tools, our seam rippers have an easy, no-tool blade change. To do this,
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.
1) Hold the seam ripper so that the slider is on top and the small grey nub is on the bottom.
2) Make sure the blade is fully retracted, as the blade-change cap cannot be removed when the blade is extended.
3) To remove the blade-change cap, push in the grey nub with your thumb and tilt the bottom of the cap away from the handle, as though there is an invisible hinge between the top of the cap and the top of the handle. Pull the cap away.
4) Once the cap is removed, extend the blade fully and remove it from its (green/orange) housing.
5) Place the new blade in the housing, ensuring that the notch lines up properly.
6) Retract the blade fully and replace the blade-change cap by hinging it back on with the same angle you used to remove it.